Microtronik Autohex II BMW WVCI HW4 Diagnostic Scan Coding

MicroTronik
SKU: HOV-PROG-MTKA-034

$4,700.00

Compare

Description

SKU HOV-PROG-MTKA-034
Manufacturer Microtronik
Product Type Key Programmer

Info

Autohex II Diagnostic Scan tool

Autohex II HW4 and all required features needed to program BMW keys for E and F series, solving all cases including all keys lost (HexTag is included)

Using this kit you can do following:

  • Read old ISN in BMW E series for following Ecus:D62M57A0, D62M57B0, D60PSA0, D50M57A0, D50M57E1, D60M47A0, D60M57A0, MEV9N46L, ME9N45, ME9N62, ME9E65_6, N73_L0, N73_R0, ME9N62_2, MSV70, MS450DS0, N62_TUE, N62_TUE2.
  • Read Long ISN (SK) in BMW E series from following Ecus: MSV80, MSD80, MSD81, MSD85, MSD85Y, MSS60, MEVD176K, ME17N45, MED17_2, MED17_2N, MEV17_2, MEV17N46, MEVD174K, MEVD174KW, MV1722, MVD1722, MEVD172, MEVD1724, MEVD1725, MEVD172Y, MEVD17KW, D70N47A0, D70N47B0, D71N47A0, D71N47B0, D71N47C0, D71N47D0, D72N47A0, D72N47B0, D73N47A0, D73N57A0, D73N57B0, D73N57C0, D73N57D0
  • Read Long ISN (SK) in BMW F series from following Ecus: MEVD172Y, MEVD172, MEVD1724, MEVD1725, N63TU_L0, N63TU_R0, S63TU_L0, S63TU_R0
  • Read/Write long ISN (SK) in BMW E and F series on Bench using Factory Mode. No need to open the DME/DDE (Only Autohex II can do this function)
  • ISN Reading from Tricore Ecus by boot mode.
  • CAS1, CAS2, CAS3 and CAS3+ read and write ISN and SK
  • Key Programming For E and F series (CAS1, CAS2, CAS3, CAS3+, CAS4 ,CAS4+, FEM, BDC)
  • BMW E series EGS ISN matching with CAS
  • BMW F series EGS 8HP EWS Resetting
  • BMW E and F series coding for all Ecus (calculation of Ecucoding is calculated from FA)
  • Vehicle order modification and backup and restore from LM,FRM,…ETC
  • Do diagnose and service functions from Autohex II (Read and erase fault codes, data stream values, activations, reset adaptation,…)
  • Use BMW ISTA-D on Autohex II WVCI (BMW ISTA-D Driver)
  • Unlock security of BDC and FEM to able to: Change BDC and FEM VIN, Change BDC and FEM
  • ISN, Mileage Reset for BDC and FEM, and making a key for BDC and FEM.
  • Read and write ISN of MSD85, MSD87, MSV90 in F series.
  • Ecu Cloning/Tuning for a wide range of brands. This function is free for 90 days (Check Supported Ecu List).
  • Read and write CAS 1,2,3,4 EEPROM and FLASH 100% safely using HexTag tool.
  • Read and write other modules from BMW, Mercedes, Audi, and others BDM protocol by HexTag tool.
  • Modify KOMBI Mileage by HexTag tool
  • Renew all BMW keys, and many other brands by HexTag tool.

What you miss in this Kit:

  • BMW E Series, F Series and G Series online Ecu Programming and Manual coding (can be ordered later)

What you get:

  • Autohex II Hardware WVCI HW 4
  • The Powerful Hextag BDM and Key Programmer
  • BMW Software Standard License
  • ISN Boot Mode License
  • Key Programming License
  • BMW ISTA/D driver to run dealer software
  • 1 year technical support
  • 1 year hardware warranty
preloader